Battery Strap

8 RacingBATTERY STRAP PLATE#8R-210-BS
Material: Carbon Fiber
Atomic CarbonBATTERY STRAP#210BAT
Material: 2.5mm Carbon Fiber
Diggity DesignsBATTERY STRAP#DEX210-102
Material: 2.5mm Carbon Fibre
ExotekCOMPACT BATTERY STRAP#1295
Material: Carbon Fiber
Revolution Design Racing ProductsBATTERY PLATE#RDRP0036
Material: Carbon Fiber
Revolution Design Racing ProductsBATTERY PLATE#RDRP0035
Material: Black anodised 7075-T6 aluminum
ST Racing ConceptsLIGHTWEIGHT BATTERY STRAP#SPTSTR320128CF
Material: Carbon Fiber
Team SRTRIPLE X BATTERY BRACE#TSR252
Material: Black anodised 6061 aluminum
TresreyBATTERY PLATE #TYTD126
Material: Carbon Fiber
Notes: Designed for RM layouts only

Battery Thumb Nuts

CreamTHUMB SCREWS
Material: Aluminum
Notes: Star design nuts
ExotekALLOY TWIST NUTS#1191
Material: Anodised alloy
Notes: Available in various colors
Revolution Design Racing ProductsTHUMB SCREW NUT#RDRP0037
Material: Gold anodised 7075-T6 aluminum
Team DurangoTHUMB NUTS(BLACK)#TD320206
Material: Black anodised aluminum
Team DurangoTHUMB NUTS(GOLD)#TD320207
Material: Gold anodised aluminum
Team DurangoTHUMB NUTS(RED)#TD320208
Material: Red anodised aluminum
Team DurangoTHUMB NUTS(OLIVE)#TD320209
Material: Olive anodised aluminum
TresreyBATTERY THUMB NUT SET#TYTD066
Material: Red anodised aluminum

Bling - Bulkhead Bushing

Revolution Design Racing ProductsFRONT TOP DECK BUSHING SET#RDRP0042
Material: Gold anodised 7075-T6 aluminum
Team DurangoBULKHEAD BUTTON(BLACK)#TD320194
Material: Black anodised aluminum
Team DurangoBULKHEAD BUTTON(GOLD)#TD320195
Material: Gold anodised aluminum
Team DurangoBULKHEAD BUTTON(RED)#TD320196
Material: Red anodised aluminum
Team DurangoBULKHEAD BUTTON(OLIVE)#TD320197
Material: Olive anodised aluminum
TresreyFRONT TOP DECK BUSHING SET#TYTD101
Material: Red anodised aluminum

Bling - Spacers

Team DurangoSPACERS 8x3x0.5mm(RED)#TD709056
Material: Red anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x1mm(RED)#TD709040
Material: Red anodised aluminum
Notes: 4 per packet.
Team DurangoSPACERS 8x3x2mm(RED)#TD709041
Material: Red anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x2.8mm(RED)#TD709042
Material: Red anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x0.5mm(OLIVE)#TD709057
Material: Olive anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x1mm(OLIVE)#TD709044
Material: Olive anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x2mm(OLIVE)#TD709045
Material: Olive anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x2.8mm(OLIVE)#TD709046
Material: Olive anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x0.5mm(GOLD)#TD709055
Material: Gold anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x1mm(GOLD)#TD709003
Material: Gold anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x2mm(GOLD)#TD709004
Material: Gold anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 8x3x2.8mm(GOLD)#TD709005
Material: Gold anodised aluminum
Notes: 4 per packet
Team DurangoSPACERS 6x3x0.5mm(GOLD)#TD709007
Material: Gold anodised aluminum
Notes: 10 per packet
Team DurangoSPACERS 6x3x0.5mm(OLIVE)#TD709047
Material: Olive anodised aluminum
Notes: 10 per packet
Team DurangoSPACERS 6x3x0.5mm(RED)#TD709043
Material: Red anodised aluminum
Notes: 10 per packet
TresreyWASHER SET 3X8X0.5mm#TYTD088
Material: Red anodised aluminum
Notes: 10 per packet
TresreyWASHER SET 3X8X0.75mm#TYTD092
Material: Red anodised aluminum
Notes: 10 per packet
TresreyWASHER SET 3X8X1.0mm#TYTD090
Material: Red anodised aluminum
Notes: 10 per packet
TresreyWASHER SET 3X8X2.0mm#TYTD092
Material: Red anodised aluminum
Notes: 10 per packet

Bling - Wing Washer

Team DurangoWING BUTTON(BLACK)#TD320202
Material: Black anodised aluminum
Team DurangoWING BUTTON(GOLD)#TD320203
Material: Gold anodised aluminum
Team DurangoWING BUTTON(RED)#TD320204
Material: Red anodised aluminum
Team DurangoWING BUTTON(OLIVE)#TD320205
Material: Olive anodised aluminum
TresreyWING MOUNTS#TYTD096
Material: Red anodised aluminum

Bodies

Bugle Boy RacingBODY & WING SET#BBR0011
Material: Bayer Makrolon 0.8mm (0.031") polycarbonate
Notes: Designed for any motor configuration by either cutting for one particular mid motor configuration or leaving the rear uncut for rear motor. Optional rear cowl set sold separately #BBR0015
JConcepts"FINNISHER" BODY w/6.5" HI-CLEARANCE WING#JCI0228
Material: Clear polycarbonate with protective film
Phat Bodies"SMOOTHEE" BODY
Material: Polycarbonate (Lexan)
Notes: Includes front wing for improved downforce
Pro-Line2012 BULLDOG BUGGY BODY#PRO3375-00
Material:Crystal Clear Genuine GE Lexan
Notes: Comes with a wing
Pulse RCBODYSHELL AND WING SET#PU-0004
Notes: Comes with velcro for mounting
Team DurangoCAB FORWARD BODY#TD402014
Notes: Cab forward body for the standard chassis.
Team DurangoCAB FORWARD BODY +8MM#TD402012
Material: Polycarbonate
Notes: Designed for the DIMEC DEX210 Chassis types

Bumper/Skid Plates

Sumo RacingFRT/RR SKID COMBO#SUM7003
Notes: Rear skid plate designed for RM setups
T-Bone RacingREAR SKID - MM#18020
Notes: Designed for MM configurations. Comes with required hardware.
T-Bone RacingREAR SKID RM#18019
Notes: Designed for RM setups
T-Bone RacingPRO FRONT BUMPER#18018
Material: Nylon
T-Bone RacingRACER2 FRONT BUMPER#18017
Material: Nylon

Chassis

8 RacingCARBON FIBER STD. LENGTH CHASSIS#8R-210-MC
Material: Carbon Fiber
8 RacingCARBON FIBER +8MM V2 MAIN CHASSIS#8R-210-MC8V2
Material: Carbon Fiber
Notes: +8mm chassis, comes with aluminum sideguard extenders.
ExotekCARBON FIBER CHASSIS PLATE#1459
Material: Carbon Fiber with 7075 alloy nose plate.
Notes: +8mm chassis
Exotek+8MM CARBON CHASSIS SET#1347
Material: Carbon Fiber chassis. 7075 Aluminum nose plate
Revolution Design Racing Products"PLUS11" ALUMINUM CHASSIS#RDRP0184
Materials: Black anodised 7075-T6 aluminum
Notes: 11mm longer than the standard chassis
Team DurangoDIMEC CHASSIS +8MM 'TYPE B'#TD320229
Material: Plastic Notes: Requires Motor Guard (Type B)#TD320227, Front bulkhead & Suspension mount set (Type B)#TD330578 and Cab forward body (+8MM) #TD402012
Team DurangoDIMEC20 CHASSIS +8MM 'TYPE B'#TD320247
Material: Plastic Notes: Stiffer than the standard DIMEC chassis.
Requires Motor Guard (Type B) #TD320227, Front bulkhead & Suspension mount set (Type B) #TD330578 and Team Durango +8mm bodies for use with the v1 kit
TresreyMACHINED ALUMINUM MAIN CHASSIS #TYTD130
Material: A7075 Duralumin
Notes: Not compatible with Under Servo Weights
TresreyMACHINED ALUMINUM +10MM CHASSIS #TYTD134
Material: A7075 Duralumin
Notes: 10mm longer than standard chassis, not compatible with Under Servo Weights.

Front Axle

Exotek12MM HEX TITANIUM FRONT AXLES#1513
Material: Titanium
Notes: Allows the use of B5 wheels.
Requires: DEST210/DESC210 Steering Knuckles TD330382
M4 wheel nuts.
Revolution Design Racing ProductsFRONT AXLE SET(INCH SIZE)#RDRP0055
Material: Titanium
Notes: Allows the mounting of B4 type wheels
Team DurangoSTEEL FRONT AXLE#TD330399
Material: Steel
Team DurangoSTEEL FRONT AXLE - IMPERIAL#TD330400
Material: Steel
Notes: Allows the use of B4 type wheels
TresreyHD AXLE SHAFT SET#TYTD121
Material: Steel
Notes: 1.4mm narrower than the standard part
TresreyAXLE SHAFTS (B4 TYPE) #TYTD074
Material: Steel
Notes: Allows the mounting of B4 type wheels

Gear Cover

Bugle Boy RacingGEAR COVER#BBR0016
Material: 0.8mm Bayer Makrolon polycarbonate
ExotekHD GEAR COVER#1260
Material: Black anodised alloy
Notes: Allows up to 37T pinion. Slotted bottom screw mounting for easier removal from mid motor configuration
Weight: 10g

Hubs - Front

ArrowmaxFRONT C-HUB SET#AM-TD330339
Material: 7075 alloy
Revolution Design Racing Products0 CASTER INSERT SET#RDRP0041
Material: 7075-T6 Aluminum
Revolution Design Racing ProductsC-HUB SET#RDRP0185
Material: Black anodised 7075-T6 aluminum
Notes: Features two additional outer camber link mounting positions. Reduces the front track width by 1mm per side.
TresreyDIRECT MOUNT C HUB (0)#TYTD143
Material: Red anodised aluminum
Notes: 3 camberlink mounting positions. Fixed caster position

Hubs - Rear

ExotekREAR PRO HUB (1 PAIR)#1224
Material: Black or Gold anodised 7075 alloy
Notes: Vertical ball stud mounting allows for easy roll center adjustments by adding shims.
Team DurangoREAR HUB CARRIERS#TD330377
Material: Aluminum
Notes: Ballstuds are mounted vertically. Spacers allow for additional camberlink tuning.
TresreyHYBRID REAR HUB CARRIER SET#TYTD117
Material: Red anodised aluminum with Carbon Fiber camber mounts

Misc. Aluminium Options

ExotekSERVO MOUNTS#1248
Material: Gold anodised alloy
ExotekREAR MOTOR HRC BULKHEAD CONVERSION#1504
Material: Gold or Black anodised 7075 alloy.
Notes: Requires hand cutting of the stock plastic gearbox
Lower inner camber link mounting point (same width) for improved high roll center options
Chassis mounted alloy inner ball stud mounting.
Re-locate the shock tower to be in front of the rear shocks.
Change the flex characteristics of the chassis/gearbox.
Easier gear box access and removal.
Can mount the wing more forward or the rear stock gearbox location.
ExotekMM REAR BULKHEAD#1536
Material: Black anodized 7075 alloy.
Notes:
- Requires hand cutting of the stock plastic gearbox
- Lowered inner camber link mounting point (same width) for improved high roll center options.
- Much easier gear box access and removal.
- The suspension stays fully in place when the gear box is removed.
- Stronger inner ball end mounting for more durable camber link mounting.
- More secure and stiffer gear box mounting.

Misc. Carbon Fiber Options

Atomic CarbonSTEERING BRACE#210STB
Material: 3mm Carbon Fiber

Misc. Plastic Options

Team DurangoBUMPER & REAR TOP DECK SET (TYPE B)#TD320269
Notes: Redesigned RM chassis brace for use with REAR CHASSIS BRACE SET (TYPE B) #TD320270. Includes a new rear bumper for MM setups using the Type B chassis types.
Team DurangoREAR CHASSIS BRACE SET (TYPE B)#TD320270
Notes: Includes redesigned RM upper brace for use with BUMPER & REAR TOP DECK SET (TYPE B)#TD320269.
Team DurangoGEARBOX SET (TYPE B)#TD310459
Notes: Redesigned transmission case features an additional camberlink mounting hole with extra material to reinforce the camberlink mounts. The sway bar mount has also been molded into the new transmission case.

Misc. Transmission Parts

ExotekDIRECT SPUR MOUNT#1428
Notes: Slipper eliminator spur gear mounting hub for the DEX210 series buggies and trucks.
Requires the use of Kimbrough spur gears.
#301 66 tooth
#150 69 tooth
#143 72 tooth
#161 73 tooth
#162 74 tooth
ExotekALLOY 'FLITE' TOPSHAFT#1441
Material: 7075 alloy
Weight: 3.9g
Notes: Lightweight option to reduce rotational mass.
Team DurangoDIFF. GEAR 9T#TD310003
Material: Steel
Notes: 4 per packet.
Team DurangoGEARED DIFF. AXLE #TD310002
Material: Steel
Notes: 2 per packet.
Team DurangoVENTED SLIPPER PLATE SET#TD310272
Material: Aluminum
Team DurangoGEAR DIFF SET#TD210034
Team DurangoLIGHTWEIGHT DIFF OUTDRIVES#TD310275
Notes: Light weight outdrives for the '210 gear diff #TD210034
Team DurangoDRIVESHAFT BOOT - WHEEL AXLE#TD310259
Material: Rubber
Team DurangoDRIVESHAFT BOOT - OUTDRIVE#TD310258
Material: Rubber
Team DurangoBALL DIFF OUTDRIVES - LONG#TD310417
Material: Steel
Notes: Ensures that the rear drivshaft assembly operates smoothly during any "extreme droop" settings
Team DurangoALUMINUM CVD AXLES#TD310274
Material: Hard anodised aluminum
Notes: Light weight option to the stock CVD axles.
Team DurangoMOULDED CROSS SHAFT AND GEAR SET#TD310290
Material: Plastic
Notes: Lightweight option for gear diff internals.
TresreySLIPPER HUB AND LAY SHAFT SET (B4 TYPE)#TYTD071
Notes: Designed for the mounting of common sized Team Associated or Tamiya style spur gears.

Motor Plate

ExotekFINNED 7075 MOTOR MOUNT#1234
Material: Black anodised aluminum
ExotekVENTED 'FLITE' MOTOR PLATE#1491
Notes: This motor plate is designed for use on indoor clay track or carpet environments.
Revolution Design Racing Products210 SERIES HEAT SINK MOTORPLATE SET#RDRP0191
Material: Black anodised aluminum Notes: Includes a motor plate, side adapter and spacer.
ST Racing ConceptsHEATSINK MOTOR PLATE(GUN METAL)#SPTSTR310255GM
Material: Gun Metal anodised aluminum
ST Racing ConceptsHEATSINK MOTOR PLATE(Gold)#SPTSTR310255G
Material: Gold anodised aluminum
ST Racing ConceptsHEATSINK MOTOR PLATE(BLACK)#SPTSTR310255BK
Material: Black anodised aluminum
Team DurangoHEATSINK MOTOR PLATE#TD310276
Material: Aluminum
TresreyHEATSINK MOTOR PLATE#TYTD080
Material: Red anodised aluminum
Notes: Comes with an attachment to replace the plastic spacer

Rear Camberlink Mount

Sumo RacingINNER CAMBER BRACE#SUM7004
Notes: Reinforces the stock camberlink positions.
TresreyREAR CAMBER LINK MOUNT#TYTD105
Material: Carbon Fiber
Notes: Relocates the camberlink ballstud away from the transmission case. Comes with required hardware and spacers for adjustments.

Shock Tower - Front

8 RacingCARBON FIBER FRONT SHOCK TOWER W/26G WEIGHTED MOUNT SET#8R-210-FST
Material: 4mm Carbon Fiber Tower. Brass camberlink mounts.
Notes: Camberlink mounts weigh 26g.
CreamFRONT TOWER KIT
Material: 4mm Carbon Fiber Tower. Aluminum camber link mounts
Notes: Comes with 4x 12mm stainless steel screws. Aluminium camberlink mounts weigh 8.4g for the pair.
CreamREPLACEMENT CARBON TOWER
Notes: Replacement Carbon Fiber tower without camberlink mounts.
ExotekFRONT TOWER SET#1256
Material: 4mm Carbon Fiber Tower. Gold or Black anodised aluminium camberlink mounts.
Revolution Design Racing ProductsALUMINUM FRONT SHOCK TOWER#RDRP0056
Material: 7075-T6 anodized aluminum
Notes: Comes with additional shock and camberlink mounting positions. Only 7g heavier than stock
Revolution Design Racing ProductsFRONT SHOCK TOWER(BLACK)#RDRP0058
Material: 7075-T6 black anodized aluminum Notes: Only 7 grams heavier than the stock part.
ST Racing ConceptsGRAPHITE FRONT SHOCK TOWER w/ALUMINUM STANDOFF(GOLD)#STR330398FG
Material: 4mm graphite material. Gold anodised aluminium camberlink mounts
ST Racing ConceptsGRAPHITE FRONT SHOCK TOWER w/ALUMINUM STANDOFF(GUN METAL)#STR330398FGM
Material: 4mm graphite material. Gun Metal anodised aluminium camberlink mounts
Team SRCARBON FIBER FRONT SHOCK TOWER#TSR056
Material: 4mm Carbon Fiber Tower. Black anodised aluminum camber link mounts
Notes: The edges of the carbon fiber come pre-glued. Camberlink mounts require the use of short ballstuds.
TresreyCARBON FIBER FRONT SHOCK TOWER#TYTD125
Material: 4mm Carbon Fiber Tower. Red anodised aluminum camber link mounts
Notes: Shock mounting positions have been lowered by 1mm.
TresreyREPLACEMENT FRONT SHOCK TOWER#TYTD122
Notes: Replacement Carbon Fiber tower without camberlink mounts.

Shock Tower - Rear

8 RacingCARBON FIBER REAR SHOCK TOWER #8R-210-RST
Material: 4mm carbon fiber.
Atomic CarbonREAR SHOCK TOWER#210RRT
Material: 4mm Carbon Fiber
Notes: 5 shock mounting locations.
CreamREAR TOWER
Material: 4mm Carbon fiber.
Diggity DesignsCARBON FIBRE REAR SHOCK TOWER#DEX210-100
Material: 4mm Carbon Fiber
ExotekREAR SHOCK TOWER #1227
Material: 4mm Carbon Fiber
Notes: Has an additional inner shock mounting position.
ExotekREAR CARBON SHOCK TOWER#1503
Material: 5mm Carbon Fiber
Notes: DEX210v2 geometry
Revolution Design Racing ProductsALUMINUM REAR SHOCK TOWER#RDRP0057
Material: 7075-T6 anodised aluminium. Notes: 5 shock mounting positions. Only 9g heavier than the stock tower.
Revolution Design Racing ProductsREAR SHOCK TOWER(BLACK)#RDRP0059
Material: 7075-T6 black anodized aluminum Notes: Only 9 grams heavier than the stock part.
ST Racing ConceptsLIGHT WEIGHT GRAPHITE REAR SHOCK TOWER#SPTSTR330342R
Material: 4mm Graphite Material
Team SRCARBON FIBER REAR SHOCK TOWER#TSR057
Material: 4mm carbon fiber.
Team SRCARBON FIBRE REAR SHOCK TOWER - TEAM EDITION 4MM LOWERED#DEX210-104
Material: 4mm Carbon Fiber
Notes: Shock mounting locations lowered by 4mm
TresreyCARBON FIBER REAR SHOCK TOWER#TYTD123
Material: 4mm Carbon Fiber
Notes: Shock mounting positions have been lowered 2mm. Comes with 5 red anodised spacers.

Shocks - Conversion Sets

Team DurangoSHOCK ABSORBER SET: STANDARD BORE FRONT#TD230010
Notes: Uses Team Durango's standard bore shock springs.
Team DurangoSHOCK ABSORBER SET: STANDARD BORE REAR#TD230011
Notes: Uses Team Durango's standard bore shock springs.
TresreyBIG BORE MOS COATED SHOCK CONVERSION (FRONT) #TYTD063
Notes: Includes -
2 MOS Coated Threaded Front Shock Bodies
2 Tresrey MOS Coated Shock Front Shafts
2 Shock Retainers
2 Shock Shaft Guides
2 1.2mm x 6 and 2 1.3mm x 6 Hole Machined Pistons
TresreyBIG BORE MOS COATED SHOCK CONVERSION (REAR)#TYTD064
Notes: Includes -
2 MOS Coated Threaded Rear Shock Bodies
2 Tresrey MOS Coated Shock Front Shafts
2 Shock Retainers
2 Shock Shaft Guides
2 1.2mm x 6 and 2 1.3mm x 6 Hole Machined Pistons

Shocks - Lower Caps

ExotekBOTTOM CAPS#1236
Material: Gold anodised aluminum
Notes: 4 per pack.
Revolution Design Racing ProductsBIG BORE SHOCK CAP#RDRP0054
Material: Black anodised 7075-T6 aluminum
Notes: 2 in a packet, comes with 2 preload nuts.
ST Racing ConceptsLOWER SHOCK CAPS#SPTSTR330312BK
Material: Black anodised aluminum.
Notes: 4 per packet.
ST Racing ConceptsLOWER SHOCK CAPS#SPTSTR330312G
Material: Gold anodised aluminum
Notes: 4 per packet
ST Racing ConceptsLOWER SHOCK CAPS#SPTSTR330312G
Material: Gun Metal anodised aluminum
Notes: 4 per packet
Team DurangoSHOCK SEAL CAP#TD330023
Material: Red anodised aluminum
Notes: 1 per pack.
Team DurangoSHOCK SEAL CAP#TD330562
Material: Black anodised aluminum
Notes: 1 per packet
Team DurangoSHOCK SEAL CAP#TD330563
Material: Gold anodised aluminum
Notes: 1 per packet
Team DurangoSHOCK SEAL CAP#TD330564
Material: Olive anodised aluminum
Notes: 1 per packet
TresreySHOCK CARTRIDGE CAP SET #TYTD131
Materials: Red anodised aluminum
Notes: 4 per pack.

Shocks - Pistons

GHEA RacingTAPERED SHOCK PISTONS(6x1.1mm)#GHEA0012
GHEA RacingTAPERED SHOCK PISTONS(6x1.2mm)#GHEA0013
GHEA RacingTAPERED SHOCK PISTONS(6x1.3mm)#GHEA0014
MIPMIP Bypass1 Kit#12146
RC ShoxSC2 2 STAGE
RC ShoxSC4 2 STAGE
Team DurangoBIG BORE PISTON SET(TYPE B)#TD330590
Notes: Comes with the following pistons
2 x 1.6mm - 1 pair
2 x 1.7mm - 1 pair
3 x 1.6mm - 1 pair
3 x 1.7mm - 1 pair
blank pistons - 2 pairs
Team DurangoTAPER PISTONS 4x1mm#TD330178
Team DurangoTAPER PISTONS 5x1mm#TD330179
Team DurangoTAPER PISTONS 6x1mm#TD330180
Team DurangoDUAL TAPER PISTON 4x1mm#TD330394
Team DurangoDUAL TAPER PISTON 5x1mm#TD330395
Team DurangoDUAL TAPER PISTON 6x1mm#TD330396

Shocks - Preload Nuts

ExotekALLOY SHOCK COLLARS#1235
Material: Gold anodised aluminum
Notes: 4 per packet, comes 4 o-rings.
Revolution Design Racing ProductsBIG BORE PRE-LOAD NUT#RDRP0054
Material: Gold anodised 7075-T6 aluminum
Notes: 2 per packet, comes with 2 lower shock caps. Rubber o-rings included.
Spec-RSHOCK NUT#SBG-D31305
Material: 7075 Aluminum
ST Racing ConceptsSHOCK COLLARS#SPTSTR330312CBK
Material: Black anodised aluminum
Notes: 4 per packet, comes with o-ring
ST Racing ConceptsSHOCK COLLARS#SPTSTR330312CG
Material: Gold anodised aluminum
Notes: 4 per packet, o-rings included.
ST Racing ConceptsSHOCK COLLARS#SPTSTR330312CGM
Material: Gun Metal anodised aluminum.
Notes: 4 per packet, o-rings included.
Team DurangoBIG BORE PRELOAD NUT#TD330161
Material: Black anodised aluminum
Notes: 2 per packet, requires preload nut o-rings #TD330162
Team DurangoBIG BORE SHOCK PRELOAD NUT ALUMINIUM & O-RING (2PCS) (GOLD)#TD330554
Material: Gold anodised aluminum
Team DurangoBIG BORE SHOCK PRELOAD NUT ALUMINIUM & O-RING (2PCS) (RED)#TD330555
Material: Red anodised aluminum
Team DurangoBIG BORE SHOCK PRELOAD NUT ALUMINIUM & O-RING (2PCS) (OLIVE)#TD330556
Material: Olive anodised aluminum
Tresrey12MM BIG BORE SHOCK PRE-LOAD NUT SET#TYTD075
Material: Red anodised aluminum
Notes: 4 per packet, comes with o-rings.

Shocks - Shock Boots

Team DurangoFRONT SHOCK BOOTS#TD330018
Material: Rubber
Notes: 2 per packet
Team DurangoREAR SHOCK BOOTS#TD330017
Material: Rubber
Notes: 2 per packet

Shocks - Shock Caps

ExotekBB SHOCK CAPS#1269
Material: Black or Gold anodised aluminum
Notes: 4 per packet.
Spec-RBIG BORE SHOCK CAP#SBG-D31302
Material: Red anodised 7075 aluminum.
ST Racing ConceptsUPPER SHOCK CAPS(BLACK)#SPTSTR330181BK
Material: Black anodised aluminum.
ST Racing ConceptsUPPER SHOCK CAPS(GOLD)#SPTSTR330181G
Material: Gold anodised aluminum.
ST Racing ConceptsUPPER SHOCK CAPS(GUN METAL)#SPTSTR330181GM
Material: Gun Metal anodised aluminum.
Team DurangoSHOCK CAP SET(BLACK)#TD230034
Material: Black anodised aluminum Shock caps.
Notes: 2 per packet.
Team DurangoSHOCK CAP SET(OLIVE)#TD230035
Material: Olive anodised aluminum
Notes: 2 per packet.

Shocks - Shock Mount

ExotekTHREADED SHOCK POSTS#1237
Material: Gold anodised aluminum
Lunsford"QUICK TUNE" SHOCK MOUNTS#LNS7500
Material: 6AL/4V Titanium
Notes: 4 per packet. Requires Type "D" pivot balls #TD330036
Revolution Design Racing ProductsLONG SHOCK MOUNT SET#RDRP0043
Material: Titanium
Notes: 2 per packet
Spec-RSHOCK SCREW SET#SBG-D31309
Material: Spring Steel
Team DurangoSHOCK MOUNT#TD330032
Material: Steel
Notes: 2 per packet. Requires 'Type D' pivot balls #TD330036
TresreyUPPER SHOCK MOUNTING SET#TYTD133
Material: Red anodised aluminum.
Notes: 4 per packet.

Shocks - Shock Shafts

Team DurangoTITANIUM NITRIDE FRONT SHOCK SHAFT (44MM) #TD330257
Material: Black titanium nitride coated shock shafts
Notes: 2 per packet
Team DurangoTITANIUM NITRIDE FRONT SHOCK SHAFT (44MM) #TD330331
Material: Gold titanium nitride coated shock shafts
Notes: 2 per packet

Shocks - Spring Cup

ExotekSPRING PERCH#1250
Material: Black or Gold anodised aluminum
Notes: 4 per packet.
RPMSHOCK SHAFT GUARDS(BLACK)#RPM80402
Notes: Has a shield to protect shock shafts.
RPMSHOCK SHAFT GUARDS(BLUE)#RPM80405
Notes: Has a shield to protect shock shafts.
RPMSHOCK SHAFT GUARDS(WHITE)#RPM80401
Notes: Has a shield to protect shock shafts.
RPMSHOCK SHAFT GUARDS(GREEN)#RPM80404
Notes: Has a shield to protect shock shafts.
Spec-RSHOCK SPRING HOLDER#SBG-D31306
Material: 7075 Aluminum
ST Racing ConceptsSHOCK SPRING RETAINER(BLACK)#SPTSTR330157BK
Material: Black anodised aluminum
Notes: 4 per packet
ST Racing ConceptsSHOCK SPRING RETAINER(GOLD)#SPTSTR330157G
Material: Gold anodised aluminum
Notes: 4 per packet
ST Racing ConceptsSHOCK SPRING RETAINER(GUN METAL)#SPTSTR330157GM
Material: Gun Metal anodised aluminum
Notes: 4 per packet

Spur Gears

AvidTRIAD SPUR 66T# AV1020-66
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 69T#AV1020-69
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 72T#AV1020-72
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 75T#AV1020-75
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 76T#AV1020-76
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 78T#AV1020-78
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 81T#AV1020-81
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 84T#AV1020-84
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
AvidTRIAD SPUR 87T#AV1020-87
Notes: Requires Triad Slipper Clutch Mod #AV1020-MOD or Stock #AV1020-STK and Triad Durango Upgrade Pack #AV1020-DUR-UPGRADE
Revolution Design Racing ProductsPRECISION SPUR GEAR 78T#RDRP0050
Revolution Design Racing ProductsPRECISION SPUR GEAR 83T#RDRP0051
Revolution Design Racing ProductsPRECISION SPUR GEAR 87T#RDRP0052
RW RacingSPUR GEAR 87T#RW48DU87
RW RacingSPUR GEAR 89T#RW48DU89
RW RacingSPUR GEAR 78T#RW48DU78
RW RacingSPUR GEAR 69T#RW48DU69
RW RacingSPUR GEAR 75T#RW48DU75
RW RacingSPUR GEAR 81T#RW48DU81
RW RacingSPUR GEAR 83T#RW48DU83
RW RacingSPUR GEAR 85T#RW48DU85
Team DurangoMACHINED SPUR GEAR 69T#TD310442
Team DurangoMACHINED SPUR GEAR 72T#TD310441
Team DurangoMACHINED SPUR GEAR 75T#TD310310
Team DurangoMACHINED SPUR GEAR 78T#TD310311
Team DurangoMACHINED SPUR GEAR 81T#TD310312
Team DurangoMACHINED SPUR GEAR 84T#TD310313
Team DurangoMACHINED SPUR GEAR 87T#TD310314

Steering Crank

ExotekSTEERING CRANK (PAIR)#1218
Material: Gold anodised alloy
Notes: Allows for left or right servo horn mounting
TresreySTEERING BELL CRANK SET#TYTD132
Material:Red anodised aluminum
Notes: Use of a quality race grade metal gear steering servo is highly recommended.

Steering Rack

Atomic CarbonSTEERING RACK/LINK#210STL
Material: 3mm Carbon Fiber
Diggity DesignsSTEERING DRAG LINK#DEX210-103
Material: 2.5mm Carbon Fibre
ExotekSTEERING LINK#1217
Material: Gold anodised alloy
Revolution Design Racing ProductsR2 STEERING PLATE#RDRP019
Material: Black anodised 7075-T6 aluminum
Notes: Uses a vertical inner ball stud position
Team DurangoSTEERING PLATE#TD320157
Material: Aluminum
Team SRACKERMAN RACK#TSR055
Material: Carbon Fiber
Notes: Edges are pre-glued.
TresreySTEERING PLATE #TYTD065
Material: Carbon Fiber

Suspension Mount - Front

CreamFRONT BULKHEAD
Material: Brass
Weight: 64g
Notes: Not compatible with Team Durango's 'Type B' Chassis Types.
CreamFRONT BULKHEAD
Material: Aluminium
Weight: 22g
Notes: Not compatible with Team Durango's 'Type B' chassis types.
ExotekFRONT BULKHEAD#1249
Material: Black or Gold anodised T6 Alloy
Weight: 14g
Notes: Newer versions are compatible with the '210 type B chassis types.
Revolution Design Racing ProductsALUMINUM FRONT SUSPENSION BLOCK#RDRP0039
Material: Hard anodized 7075-T6 aluminum.
Weight: 21g.
Notes: Not compatible with Team Durango's 'Type B' chassis types.
Revolution Design Racing ProductsBRASS FRONT SUSPENSION BLOCK#RDRP0040
Material: Brass
Weight: 65g
Notes: Not compatible with Team Durango's 'Type B' chassis types.
TresreyFRONT BULKHEAD#TYTD079
Material: Red anodised aluminum
Notes: Suspension mount does not have droop tabs. Will not fit Team Durango 'Type B' chassis types.

Suspension Mount - Rear Set

Revolution Design Racing ProductsLRC(LOW ROLL CENTER) SUSPENSION MOUNT SET#RDRP0186
Material: Black anodised 7075-T6 aluminum
Notes: The set includes a RF suspension mount as well as 0, 1.5 and 3 RR mounts. These blocks are a direct fit on the RDRP PLUS11 DEX210 aluminum chassis. Other chassis types require modification. Not designed for Team Durango's 'Type B' chassis types.
Team SRRF SUSPENSION MOUNT SET#TSR061
Material: Black anodised 70-75 aluminum
Toe-in:3
Notes: Set includes 0, 1.5 and 3 anti-squat mounts. Designed for MM setups.

Suspension Mount - RF

ExotekRF HANGER WITH SHIMS + LRC#1373
Notes: Adjustable suspension mount with shims allowing for 0 or 1.5 kick up in either high or low roll center configurations.
RCJunkyALUMINUM RF PIVOT BLOCKS
Material: Aluminum
Toe-in: 3
Notes: Available in 0, 1.5 and 3 anti-squat versions. Spacers also available to alter anti-squat values.
Team DurangoSUSPENSION HOLDER: RF#TD330565
Team SRREAR INNER SUSPENSION MOUNT (3 TOE / 0 ANTI-SQUAT)#TSR058
Material: Black anodised 70-75 aircraft aluminum.
Toe-in: 3
Anti-squat: 0
Notes: Designed for MM setups
Team SRREAR INNER SUSPENSION MOUNT (3 TOE / 1.5 ANTI-SQUAT)#TSR059
Material: Black anodised 70-75 aircraft aluminum.
Toe-in: 3
Anti-squat: 1.5
Notes: Designed for MM setups
Team SRREAR INNER SUSPENSION MOUNT (3 TOE / 3 ANTI-SQUAT)#TSR060
Material: Black anodised 70-75 aircraft aluminum.
Toe-in: 3
Anti-squat: 3
Notes: Designed for MM setups
TresreyALUMINUM RF SUSPENSION HANGER (3/2)#TYTD078
Material: Red anodised aluminum
Anti-Squat: 2
Toe-In: 3

Suspension Mount - RR

CreamRR SUSPENSION MOUNTS
Material: Brass
Weight: 26g
Notes: Designed for MM configurations. Not designed for Team Durango's 'Type B' chassis types.
ExotekRR HANGER - TYPE B, +0.5#1386
Material: Gold anodised 7075 alloy
Notes: Increases inboard toe to 3.5.
ExotekRR HANGER - TYPE B#1385
Material: Gold anodised 7075 alloy
ExotekLRC RR HANGER - TYPE B, +0.5#1384
Material: Gold anodised 7075 alloy
Notes: Increases inboard toe to 3.5. Lowers the inner rear arms by 2mm.
ExotekLRC RR HANGER - TYPE B#1383
Material: Gold anodised 7075 alloy
Notes: Lowers the inner rear arms by 2mm.
ExotekRR HANGER +0 DEGREE#1274
Material: Gold anodised 7075 alloy
Notes: Designed with a slimmer profile for easier hanger swaps and lighter weight. +0 hanger maintains the 3(inboard) toe-in value. Not designed for Team Durango's 'Type B' chassis types.
ExotekRR HANGER +.5 DEGREE#1275
Material: Gold anodised 7075 alloy
Notes: Designed with a slimmer profile for easier hanger swaps and lighter weight. +.5 hanger makes the overall inner toe (inboard) 3.5. Not designed for Team Durango's 'Type B' chassis types.
ExotekMM RR +0 DEGREE#1284
Material: 7075 alloy
Weight: 6g
Notes: Designed for MM configurations and eliminates the need for the plastic spacers. +0 hanger maintains the 3(inboard) toe-in value. Not designed for Team Durango's 'Type B' chassis types.
ExotekMM RR +.5 DEGREE#1285
Material: Gold anodised 7075 alloy
Weight: 6g
Notes: Designed for MM configurations and eliminates the need for the plastic spacers. +.5 hanger makes the overall inner toe (inboard) 3.5. Not designed for Team Durango's 'Type B' chassis types.
ExotekMM RR hanger +0 TYPE 2#1553
Material: Gold anodized 7075 alloy.
Notes: Designed for mid motor cars. Eliminates the need for the spacer inserts.
Weight: 6 grams
ExotekMM RR hanger +0.5 TYPE 2#1552
Material: Gold anodized 7075 alloy.
Notes: Designed for mid motor cars. Eliminates the need for the spacer inserts. Adds 0.5 degrees of rear toe.
Weight: 6 grams
ExotekRR HANGER -2mm LRC#1374
Material: Gold anodised 7075 alloy.
ExotekRR HANGER -2mm LRC +0.5 TOE#1375
Material: Gold anodised 7075 alloy. Notes: Provides an addition 0.5 inboard toe in.
Team DurangoRR SUSPENSION HANGER (3 DEGREE) (TYPE B)#TD330579
Material: Olive hard anodised aluminium
Notes: Designed for Team Durango's 'Type B' chassis types
Team DurangoRR SUSPENSION HANGER -2MM LRC (3 DEGREE) (TYPE B)#TD330599
Material: Olive hard anodised aluminium
Notes: Designed for Team Durango's 'Type B' chassis types. Provides -2mm Low Roll Centre option.
Team DurangoSUSPENSION HANGER RR 3DEG#TD330344
Material: Olive hard anodised aluminum.
Notes: Not designed for Team Durango's 'Type B' chassis types.
TresreyREAR TOE BLOCK (0.5 DEGREE)#TYTD102
Material: Red anodised aluminum
Notes: Provides +0.5 toe-in. Not designed for Team Durango's 'Type B' chassis types.
TresreyREAR TOE BLOCK (1 DEGREE)#TYTD103
Material: Red anodised aluminum
Notes: Provides +1 toe-in. Not designed for Team Durango's 'Type B' chassis types.

Turnbuckles

Team DurangoTITANIUM TURNBUCKLES 3X28mm#TD330046
Material: Titanium
Notes: DEX210 - Rear Camberlink
DEX410 - Sway Bar links
Team DurangoTITANIUM TURNBUCKLE 3x43mm#TD330045
Material: Titanium
Notes: 2 per packet.

Weight - Battery Retainer

CreamBATTERY RETAINER WEIGHT
Material: Brass
Weight: 24g
Revolution Design Racing ProductsBATTERY RETAINER WEIGHT#RDRP0044
Material: Brass
Weight: 24g

Weight - Motor

Revolution Design Racing ProductsULTRA MOTOR WEIGHT(60g)#RDRP0010
Material: Brass
Weight: 60g
Revolution Design Racing ProductsULTRA MOTOR WEIGHT(30g)#RDRP0011
Material: Brass
Weight: 30g

Weight - Rear

Revolution Design Racing ProductsBRASS REAR WEIGHT#RDRP0049
Material: Brass
Weight: 50g
Notes: Designed for MM configured vehicles.
TresreyHIGH TRACTION CHASSIS WEIGHT #TYTD098
Materials: Brass
Weight: 24g
Notes: Designed to add weight to the rear of MM configured vehicles.

Weight - Under Servo

CreamUNDER SERVO WEIGHT
Material: Brass
Weight: 24g
ExotekFR BRASS WEIGHT#1222
Material: Brass
Weight: 20g
Notes: Comes with a protective black coating.
Team DurangoNOSE WEIGHT 15g#TD320131
Material: Brass
Weight: 15g
Team DurangoNOSE WEIGHT 30g#TD320130
Material: Brass
Weight: 30g

Wheel Hex

Exotek12MM HEX SET (2)#1474
Material: Gold anodised aluminum
Notes: Clamp design. 2 per packet.
Exotek14MM LOCKING HEX (2)#1273
Material: Gold anodised aluminum
Notes: 2.5mm set screw locks axle pin in place. 2 per packet.
Team DurangoWHEEL HEX(GOLD)#TD310226
Material: Gold anodised aluminum
Team DurangoWHEEL HEX(BLACK)#TD310395
Material: Black anodised aluminum
Team DurangoWHEEL HEX(RED)#TD310396
Material: Red anodised aluminum
Team DurangoWHEEL HEX(OLIVE)#TD310397
Material: Olive anodised aluminum
Tresrey14MM HEX WHEEL HUB CLAMP SET#TYTD076
Material: Red anodised aluminum
Notes: Uses a screw to clamp hex onto axle.

Wheels - Front

DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(BLACK) #DER-SB-DFB
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(WHITE) #DER-SB-DFW
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(YELLOW) #DER-SB-DFY
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(GREEN) #DER-SB-DFG
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(ORANGE) #DER-SB-DFO
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(RED) #DER-SB-DFR
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY FRONT WHEEL(PINK) #DER-SB-DFP
DE Racing"BORREGO" 2WD FRONT WHEELS(BLACK)#DER-BB-DFB
DE Racing"BORREGO" 2WD FRONT WHEELS(SILVER)#DER-BB-DFS
DE Racing"BORREGO" 2WD FRONT WHEELS(WHITE)#DER-BB-DFW
DE Racing"BORREGO" 2WD FRONT WHEELS(YELLOW)#DER-BB-DFY
Team DurangoWHITE FRONT WHEEL#TD510020

Wheels - Rear

DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(YELLOW) #DER-SB-DRY
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(BLACK) #DER-SB-DRB
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(WHITE) #DER-SB-DRW
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(GREEN) #DER-SB-DRG
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(PINK) #DER-SB-DRP
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(RED) #DER-SB-DRR
DE Racing"SPEEDLINE" 2.2 1/10 BUGGY REAR WHEEL(ORANGE) #DER-SB-DRO
DE Racing"BORREGO" REAR WHEEL(BLACK)#DER-BB-DRB
DE Racing"BORREGO" REAR WHEEL(SILVER)#DER-BB-DRS
DE Racing"BORREGO" REAR WHEEL(WHITE)#DER-BB-DRW
DE Racing"BORREGO" REAR WHEEL(YELLOW)#DER-BB-DRY
Team DurangoWHITE REAR WHEEL#TD510015

Wing Mounts

ExotekMM WING MOUNTS#1482
Material: Gold anodised 7075 alloy
Notes: Utilises M3 screws to mount the wing.
Revolution Design Racing Products+8mm WING MOUNT(MID MOTOR)#RDRP0107
Material: Black anodised 7075-T6 aluminum
Notes: Raises wing mounting location 8mm. Designed for MM layouts only
Revolution Design Racing Products+8mm WING MOUNT(REAR MOTOR)#RDRP0108
Material: Black anodised 7075-T6 aluminum
Notes: Raises wing mounting location 8mm. Designed for RM layouts only