Step 10

Bags 21 and 48. For more tuning options additional inserts are provided in bag 37.

Attach the rear suspension mount.

Push the hinge pins into the arms.

Attach the arms and front suspension mount. Make sure the arms are facing the right way.

Step 11 and 12

I did these steps together.

Bags 55 and 56. For more tuning options additional inserts are provided in bag 62.

Put the inserts in position, taking note of their orientation.

Push the hinge pins into the top arms and clip the caster adjustment clips onto the hinge pins.

Attach the upper arms and front brace. Make sure the upper arms are facing the right way.

Step 13

Bags 39

The front bumper has a brace that can be damage the suspension inserts in the front suspension mount during hard frontal hits, it's recommended to remove it.

Place everything into position. Make sure the driveshaft goes into the center diff outdrive.

Screw the front assembly to the chassis. Make sure to use thread lock on the screws that go through the top deck into the steering posts.

<< PrevNext >>