Step 17

Bags 32 and 53

Check that the driveshaft screw is tight.

Apply grease to the input and ring gears and insert the diff into the diff case. Make sure the ring gear is on the left.

Attach the diff case cover, don't over tighten the screws.

Step 18

Bag 58

For this step the 2 lower screw holes on the tower are used.

Step 19

Bags 20, 43, 44 and 49. For more tuning options additional inserts are provided in bag 37.

Attach the hubs to the arms with the hex end of the screw facing towards the rear of the arm.

Push the hinge pins into the arms

I mounted the front suspension holder first.

Push the arms into position and mount the rear suspension holder.

<< PrevNext >>